160 mm PVDF Material Ultra Filtration Industrial Membrane 0660

• Membrane Type: Hollow
• Type: UF
• Membrane Space: 40 M2
• Film Material: PVDF
• Case Material: UPVC
• Pre-Filter: 50-150um
• Model NO.: UF-0660
• Working Pressure: 0.02-0.2MPa
• pH Range: 2-12
• Water Temperature: 1~40 Degree
• Capacity: 2000~6000lph
• Port Size: DN 40
• Transport Package: 1PCS/CTN
• Specification: Dia 160mm X 1810mm
• Trademark: HOLOWWAY
• Origin: Dongguan, China
• HS Code: 8421991000
• Production Capacity: 10000PCS/Month

Product Description

Product Description

Product Name: 160 mm PVDF material Ultra filtration Industrial membrane 0660

Type				Hollow fiber
Film making process				NIPS(wet process)
Membrane material				PVDF
nominal bore				0.03um
Membrane inner/outer diameter				0.7/1.4mm
Component specifications
Housing material				UPVC
Pouring materials				epoxy resin
Connection port standard				DN40
Effective membrane area				40 squre meters
Full water weight				50KG
Transport weight				35KG
Package size				190X28X29CM

Detailed Photos

Product Parameters

Pre-filter					50-150um
Operation mode					External pressure operation (dead end filtration or cross flow filtration)
Filter precision					0.03um
Operation pressure					0.02~0.2MPa
Max inlet pressure					0.3MPa
Maximum transmembrane pressure difference					0.15MPa
Continuous operation pH range					2~11
operating temperature range					1ºC~40ºC
Influent turbidity					≤50NTU
Backwash frequency					15-60min/time
Backwash pressure					≤0.2MPa
Backwash flow rate					100~150L/H.m²
Air washing aeration pressure					0.1MPa
Air washing aeration time					30~60 seconds
Aeration flow rate(Nm³/h)					4~8
Component design flux					1.2~3 m³/h.pcs
Turbidity of produced water					<0.1NTU
Water pollution density index (SDI15)					<1
Removing Escherichia coli					99.99% remove
Total number of water producing colonies					<3(CFU/mL)

Company Profile

Our Advantages

High filtration accuracy, good effluent quality (turbidity less than 0.1NTU)
Strong hydrophilicity (contact angle as low as 47 °, less prone to fouling and flux recovery)
Membrane silk has high strength and good toughness (membrane silk elongation exceeds 50%)
Low pressure and high flux (can meet the design flux at a very low transmembrane pressure difference)
Good chemical stability (the performance of the membrane module remains unchanged after 50 acid and alkali chemical cleaning)
Strong anti pollution ability (cleaning cycle extended by 30% compared to peers, and membrane flux recovery effect is good)
Externally pressurized use, with strong pollution capacity and wider inlet water quality.