| Material: | Activated Carbon |
|---|---|
| Application: | Food and Beverage, Medicine |
| Type: | Activated Carbon Filter |
| Filter Connector: | Flat Connector |
| Filtration Grade: | PRE Filter |
| Activated Carbon Filter Type: | Compact |
| Samples: |
|---|
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier
25PCS/CTN, 32*32*34CM, 7KGS/CTN
Hikins is a professional Water Purifier manufacturer with 10 years of experience, 36000 square meters of workshops Which have an injection mold workshop, RO membrane, pump, water purifier, and vacuum cleaner factory, UKAS, CE, RoHS, and ISO certificates, so we have the confidence to provide superior quality and competitive offers for you.
A. Full range RO membranes, and water filters for home use.
B. Self-produced RO SYSTEM
C. Each filter and membrane, RO System will be tested before bulk production.
D. Each finished membrane will need to pass vacuum testing, to make sure salt rejection rate.
E. OEM and ODM orders are welcomed.
Q1: What type of RO membrane is available in your company?
A1: In general, We have a Domestic RO membrane and an Industrial RO membrane. For the Domestic RO membrane, We have a Municipal Tap water RO membrane, Rural Area Under Groundwater RO membrane, a High-flow Low-pressure RO membrane, and a Brackishwater RO membrane.
For the Industrial RO membrane, We have a Low-Pressure Energy-saving RO membrane, BW Brackish water desalination RO membrane, FR Fouling Resistant RO membrane, as well as XLE Extreme Low-Pressure RO membrane, and High Salinity Brackish Water Desalination RO membrane.
Q2: What is the Salt Rejection Ratio?
A2: The Salt rejection describes the quality of salt removed from the Reverse Osmosis feed water stream as a percentage. It's one of the key elements of the RO membrane quality, however, other essential elements such as RO membrane performance durability, stability, application scope in different regions, and permeate flow output at the same pressure will all be important factors to judge the quality of the membrane.
Q3: Is the Salt creation of the RO membrane the higher the better?
A3: This will be depending on the feed water quality, if the feed water quality is good, even a 90% salt rejection membrane will be workable, if the feed water is of bad quality and with a brackish water environment, a higher salt rejection above 95% is an ideal choice. Any membrane that meets the local drinking water standard will be a good membrane.
Q4: Is there are any other elements we need to take into consideration when selecting the RO membrane?
A4: Yes, the pre-treatment filter cartridge and pre-treatment system will affect the RO membrane performance as well, please select good quality filters and pre-treatment system.
Q5: Why there is white foam-like water in the treated water at the initial usage?
A5: To preserve the RO membrane for a long shelf-life, and prevent the membrane from being oxidized, a water-soluble protection material is coated on the surface of the membrane, which will be rejected in both the rejected water and treated water, for initial use, both rejected water and treated water should be rejected and the RO membrane should be thoroughly cleaned. The treated water at initial use shall not be injected into the water storage tank.
Q6: Why there are bubbles in the treated water?
A6: Oxygen Nitrogen and carbon dioxide are water-soluble in the molecular form, during the water filtration process in the Reverse Osmosis process, those air will be released due to the pressure change between input water and output water. That air is not harmful, just like Coca-cola.
Q7: Why dry RO membrane has a salt rejection rising process from its initial usage?
A7: The performance of the RO membrane is strictly connected to the wetness of the membrane, when the membrane is wet, it will reach to its maximum performance, dry membrane has a process to become wet from its initial usage. Make sure that the membrane should be rinsed after each usage.
Q8: Why Active carbon filter is requested for the RO membrane?
A8: Chloride and chlorine content are harmful from the feed water, RO membrane is easy to be damaged as the surface of the RO membrane will be easily oxidized.
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}